Documentation
FieldTalk Modbus Slave Library for .NET
MbusSerialServerBase Methods |
The MbusSerialServerBase type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | addDataTable | Associates a protocol object with a Data Provider and a
Modbus slave ID. (Inherited from MbusSlaveServer.) |
| Dispose | Implement IDisposable. (Inherited from MbusSlaveServer.) |
| enableRs485Mode | Enables RS485 mode. |
 | Finalize | Destructor. (Inherited from MbusSlaveServer.) |
| getConnectionStatus | Checks if a Modbus master is polling periodically. (Inherited from MbusSlaveServer.) |
| getSuccessCounter | Returns how often a message transfer was successful. (Inherited from MbusSlaveServer.) |
| getTimeout | Returns the currently set master time-out supervision value. (Inherited from MbusSlaveServer.) |
| getTotalCounter | Returns how often a message transfer has been executed. (Inherited from MbusSlaveServer.) |
| isStarted | Returns whether server has been started up. (Inherited from MbusSlaveServer.) |
| resetSuccessCounter | Resets successful message transfer counter. (Inherited from MbusSlaveServer.) |
| resetTotalCounter | Resets total message transfer counter. (Inherited from MbusSlaveServer.) |
| serverLoop | Modbus slave server loop (Inherited from MbusSlaveServer.) |
| setTimeout | Configures master transmit time-out supervision. (Inherited from MbusSlaveServer.) |
| shutdownServer | Shuts down the Modbus Server. (Inherited from MbusSlaveServer.) |
| startupServer | Opens a serial Modbus protocol and the associated serial
port with the port parameters configured via properties |
| startupServer(String, Int32, Int32, Int32, Int32) | Opens a serial Modbus protocol and the associated serial port
with the port parameters configured via properties |
See Also